Intersections are very dangerous places to be. The reason drivers collide with motorcycles is because they either don’t see us or they misjudge our approach speed or distance. Here are some tips to help you become more visible at intersections.
Don’t Hide. Select lane positions that put you in open view so drivers can see you. This means not tailgating the car or truck in front and riding in the left or right portion of your lane to make sure drivers waiting to turn into or across your lane can clearly see you.
Move within your lane. Even if you are in plain sight, don’t assume drivers see you. People see what they expect to see and a motorcycle may not register in their consciousness, even if they are looking at you. Another reason drivers can look at you but not “see” you is because of “motion-induced blindness” where stationary objects disappear when surrounded by a moving background, such as busy traffic. Realize that you appear stationary if you approach a driver straight on. Even if drivers do see you they may not be able to accurately judge closing speed and approach distance because of your bikes relatively narrow frontal area.One trick is to move across your lane as you approach drivers at intersections to visually “present” the broader side area of your bike. For a more dramatic display, weave back and forth in your lane to “sweep” your headlight across drivers’ field of view. You don’t need to go crazy; swerving a few feet left and right a couple of times should do the trick. And weave only if it’s safe to do so.
Be Bright. It’s smart to wear brightly colored riding gear that gets attention and separates you from the busy background. This includes wearing a light-colored helmet and jacket or vest, as well as putting reflective material on your bike and riding gear for being seen in low light situations.
Don’t rely on noise. While loud pipes get attention, sound is not reliable for telling drivers exactly where you are. Not only that, but loud pipes direct most of the exhaust noise rearward rather than forward where the majority of dangers materialize. Selective use of an aftermarket horn is as effective and a lot less annoying to others.
Be ready. Even after using these measures you will likely encounter drivers who invade your right or way. Being mentally ready makes you more likely to approach cautiously and respond skillfully when someone cuts you off. Being ready means actively looking for trouble, slowing down and covering your brakes before approaching intersections even when everything looks to be in order.
But, don’t be a victim. Instead, reflect on your part in any close calls. You may find that (if you’re truly honest and willing) most times you can identify at least one thing you did or didn’t do to prevent the incident.
The best riders predict that a driver might cut them off (or whatever) and are already prepared by covering their brakes and positioning themselves to give maximum time and space to respond. You can protect your rights and interests by hiring a personal injury lawyer from a car accident law firm. An experienced personal injury attorney knows the local laws where the accident happened so you’ll get the best legal advice. Your attorney will also explain to you the importance of process servers when filing a claim and seeking compensation for your injuries. If you need experts in vehicular accidents, then make sure to contact auto accident attorneys from Bracamontes & Vlasak.
All the best practices in the world sometimes cannot prevent some crashes. We can’t change the behavior of careless drivers. All we can do is minimize the risk. And wear good protection in case the unavoidable happens.
Like politics and religion, it’s usually a very bad idea to bring up the Loud Pipes debate in mixed company. But, this website is here to discuss such topics, because your well being is at stake.
Before you assume this is an anti- or pro-loud pipes opinion piece, rest assured that I am sympathetic to both sides of the argument and you will discover here which tells more about the best pipes durability and performances. I’ve had bikes with loud exhaust and stock exhaust.
My intent for writing this article is to shed light on the effectiveness of certain strategies for surviving the streets on a motorcycle, including loud pipes.
First, let’s discuss whether noise is effective at getting drivers’ attention. Before that can be answered fully, we must first define “attention”. A loud noise intended as an alert, such as a siren (EMS or law enforcement), a fire alarm, or a horn is perceived as something that requires attention and triggers immediate response. Additionally, if you’re a property owner and your fire alarm system or water-based fire protection system is not functional, then you are required to implement a fire watch. You may seek expert help from a professional Fire Watch Company in Miami Lakes.
The appropriate response depends on the noise. A siren heard while driving means you need to pull over. A blaring horn means you may be about to collide with another car (or the other driver is just being a dick). Either way, you snap out of any stupor you may be in and frantically look for the problem.
A siren blasting from a municipal building means a risk to the public, like an approaching weather or seismic event. Even this depends on where you live. In Kansas it’s likely to be a tornado. In California, think earthquake. It also depends on where you are. In a movie theater this may mean fire. You get it.
An Example
Did you know that drivers colliding with stationary construction crews is a big problem? Hard to believe, but I guess it’s a thing.
Several methods have been tried to mitigate this all-too-common problem with the latest being sound. An article from the Iowa DOT talks about their trial using audible attenuators to alert drivers of construction crews in the roadway. Read the article here.
Below is an accompanying video demonstrating the attenuator. Take a look. I’ll wait.
Loud Exhaust
Many of you will take this attenuator solution as justification to run loud pipes.
But, hold on. There are differences between this system and loud motorcycle exhausts.
Noise Direction
Considering that exhaust noise is directed rearward, is a loud exhaust more effective in this situation than being seen?
One big difference between the attenuator and loud bike exhaust noise is that the attenuator is directed toward the driver and is accompanied by bright flashing lights. The sound from a motorcycle exhaust is mostly directed rearward.
Sirens and horns are pointed forward for a reason. And when you consider that most multi-vehicle motorcycle crashes come from in front, not behind, you can see the argument against loud pipes being responsible for saving lives.
Also, sound bounces off buildings, etc and is absorbed by vegetation, etc. This means that locating the source of the sound is tough. And the time it takes for a driver to identify your location could be way too late.
Can You Hear Me Now?
Modern cars are well-insulated from sound.
Another argument against loud pipes is that even the loudest exhaust may not be heard and then responded to in time. This is because cars are sound-insulated to the degree that moderately loud music or an AC fan on high can mask, mute or muffle the sound until it is just part of the background noise.
An open window certainly helps in this regard, but almost every vehicle on the road today has efficient air conditioning, which means fewer and fewer people drive with windows open.
Loud pipes are seen (and heard) on sport bikes, as well as cruisers.
OK. Let’s assume that your loud pipes alert a driver that you and your bike is in the vicinity. But, to avoid a collision requires the driver to know exactly where you are. Knowing you’re in the vicinity isn’t enough.
An example is a driver traveling in the same direction (you’re not riding in a drivers blind spot, right?) not being able to see you and then cutting you off. Unfortunately, your loud exhaust noise won’t tell him or her whether they can change lanes or not. They may look first, but maybe not.
One scenario that was pointed out to me that may justify loud(er) pipes is when in very slow traffic (think L.A.) and you are lane splitting. At these slow speeds it’s possible that a driver could hear a bike approaching from behind and will think twice about changing lanes. But, thankfully most riders don’t have to endure (or at least avoid) that extreme traffic situation, which brings us back to questioning th validity of the loud pipes strategy.
Mixed Meaning
Let’s assume that loud exhaust systems can get attention. But what exactly is the noise conveying? It’s not telling drivers’ to pull over or run for cover, so what do we expect drivers to do exactly?
A Reliable Solution: Be More Visible
If your real goal for having loud pipes is to get drivers’ attention so they don’t cut you off or crash into you, then the arguments made in this article suggest you’d be wise to consider other (or additional) strategies. Here are some suggestions that are likely to be effective.
Bright Clothing
Now, I know that hi-viz jackets, vests and helmets may not be your thing. But, you don’t have to go all HAZMAT to become more visible. Harley-Davidson predictably sells mostly black jackets to satisfy their traditional customer base, however look beyond the badass blackness and you can find a few more visible options.
Those of you not as encumbered by traditional style requirements have many options available to you, including the aforementioned hi-viz, but also white or bright colored gear that looks both sporty and stylish…and helps you be seen better in traffic. Check out this Scorpion jacket at Twisted Throttle.
Lane Positioning
Lane position strategies are effective for helping drivers see you.
One of the MOST effective tools for being seen and avoiding crashes is effective lane positioning.
Select lane positions that put you in open view so drivers can see you. This means not tailgating the car, which may be using a new car shade, or truck in front and riding in the left or right portion of your lane to make sure drivers waiting to turn into or across your lane can clearly see you. It’s up to you to select lane positions that put you in plain view.
Even if you are in plain sight, don’t assume drivers see you. There’s this thing called “motion-induced blindness” where stationary objects disappear when surrounded by a moving background, such as busy traffic. Get drivers’ attention my moving within your lane. You can simply change lane positions, or do a slight weave as you approach.
Horn
Perhaps a train horn will do the job. Notice the motor mounted behind the backrest that powers the horn.
You can rightly argue that a horn is in the same category as loud pipes. But, there is a difference. Unlike loud exhaust, a piercing horn has a more commanding meaning than the noise from loud pipes (yes, even from a “barking” throttle blip). Remember earlier when I talked about how the types of sounds communicate different meaning? Yeah, That.
The horn on most motorcycles is anemic at best and unless you fit an aftermarket blaster on your bike, you can only rely on this being effective at low speeds. Check out aftermarket horns at Twisted Throttle.
Your Choice
Before you get all cranky thinking I’m not on your side. I believe that any added tool for being seen is worthwhile.
However, (you knew this was coming, right?) loud pipes can’t be relied on for adding the kind of conspicuity necessary to avoid collisions…visibility. People have to see you!
I’m no scientist, and this is not based on empirical evidence, but experience and logic suggest that relying primarily on loud pipes for visibility is a weak strategy. Does it help? To a degree. But, in my opinion, the effectiveness is trumped by the risk of discrimination from authorities, the disdain from your neighbors and the perpetuation of the outlaw image puts us in risk of heavy handed regulation.
Of course I know that this won’t convince anyone already enamored with the badass sound of their bike to dig up the stock exhaust from the basement. However, I hope this article gives you pause before you repeat the old saw “Loud Pipes Save Lives” without at least considering that this strategy may have a relatively minor effect on preventing crashes.
Admit it…loud pipes make your bike sound better and is a way to experience the raw, visceral power of your awesome machine. But, ask yourself if perhaps they aren’t as effective as most people think at saving lives.
The Tiger on track with Mitas TerraForce tires. otmpix.com
My 2016 Triumph Tiger 800 XRx has been a reliable machine both on the street and off-road. The Tiger came with Metzeler Tourance Next (90% road/10% off-road) tires which I promptly swapped for a set of Mitas E-07 Dakar Dual Sport/Adventure bike 50/50 tires to explore more adventurous terrain. But then I had a summer of mostly pavement riding ahead of me, so I decided to try the TerraForce tires.
Mitas (pronounced Me-tass, think “Meet us”) has been around for a while as a maker of agricultural tires and is now becoming popular for Adventure (ADV) bikes.
Note: Since I have not tried the most well-known players on the ADV/DS tire spectrum, I cannot make a direct comparison. So, the review is of my impressions of this tire and how it compares to the Metzeler.
OEM Tires
The Metzeler Tourance Next tires allowed peg feeler grinding.
The OEM Metzeler Tourance Next (90% road/10% off-road) tires were fine on the street, but felt numb. This became even more apparent during a track day where the Tourance tires could not communicate well enough to instill much confidence. Grip was good though; I managed to corner hard enough to mangle both of the Tiger’s footpeg feelers.
One thing that was a big negative was the crazy handling these tires gave after about 3,000 miles. The flat spot on the rear wasn’t terrible to look at, but this caused the bike to fall in terribly when initiating lean. And I had to put pressure on the upper handlebar to keep the bike from continuing to fall into the turn (oversteer) more than I wanted. I don’t recall the Tourances dong this when new.
I rarely toss a set of tires that still have life in them, but away they went. I’ve read that lots of people like the Tourance Next, but this sucked.
From www.mitas-moto.com
Enter TerraForce
The first impression I had of the TerraForce was the increase in vibration. It seems that the very open sipes create as much or more vibration as the 50/50 E-07s.
The tires handled fine. Considering how poor the worn Metzelers handled, it was no surprise the bike felt worlds better. The bike felt neutral, unlike the oversteering the worn Metzelers produced.
Tire “feel” is a big contributor to rider confidence and the TerraForce delivers reasonably well at street speeds. However, push hard and the tires go numb. I don’t get a good sense that the tires are hooking up the way a 100% street tire does, and nothing like a supersport tire.
But, that’s no surprise since the intended job of the TerraForce is to endure sharp gravel and the occasional impact with a log or rock. This requires a measure of carcass stiffness as well as a harder compound for both pavement and gravel endurance.
I took the Tiger to the racetrack for three days. The first two days were dry and sunny. I was instructing in the novice group so I was more or less rolling around, not getting much heat into the tires. And little heat kept the tires numb and made me apprehensive about pushing harder. Bummer.
The second day was also warm and dry. One of my other instructors needed to borrow a bike to work with his assigned group at the Non-Sportbike Track training Day, so I lent him the Tiger. At lunch I asked Pete what he thought of the bike. He said it did well as a street bike and was better tn he expected for a tall ADV machine. Cool.
Pete, poised to put the TerraForce to the test.
But, he added that he had gotten his knee down in several corners! Whaaaa? Here I was thinking the TerraForce tires were a significant limiting factor for going quick and Pete goes and drags his knees …on my bike! For perspective, Pete is one fast expert racer who regularly challenges for the win on his SV650 at Loudon. But, I couldn’t let that stand, so I reclaimed the Tiger and headed out to see how the heck he did this.
Sure enough, the tires had decent feel. This obviously came from the heat Pete put into the carcass. Knowing that Pete pushed to knee-dragging lean angles gave me confidence to push harder and harder until I too got a knee down in a few corners. I had to hang off like a carnival monkey on the tall Tiger, but I did it.
Even more important was the fun factor. The tires gripped tenaciously, making this the most fun session I had all weekend.
What I learned is that if you get the tires nice and hot, they transform into a decent sporty tire. Caveat…you will not likely get the tires (or any tires) this hot at sane street speeds. But, as a street tire, the TerraForce gives plenty of grip, even if they don’t give great feel when cornering.
Zipping around in the rain on a wet racetrack.
Wet and Cool
The third track day was wet and cooler. The forecast was for rain on this day, so I brought the Tiger as my rain bike, leaving my Street Triple track bike for the dry sessions. I know that street tires are a better choice than supersport race tires because they warm up faster and the rubber compound has more silica for better wet grip.
And yes, I felt confident riding in the rain to a point where I was able to ride at a very entertaining pace. It took a few laps to get some confidence, but once some heat was generated, I was good to go. See the video below.
Off-Road
The TerraForce isn’t great in the mud.
After replacing the 50/50 E-07s with the 90/10 Terraforce, I wasn’t sure whether off-road performance would hold me back. It turns out that the 90/10s handle the rocky terrain just fine. As a matter of fact, they gave me zero problems when climbing a somewhat steep hill with some large ledge rocks.
Mud is another matter. I was with a student in the unmaintained forest roads where I conduct the Adventure/Dual-Sport bike courses when I ended up in a decent mud hole. With some momentum, I was able to get through the muck, but the tires couldn’t gain any traction and spun mud all over.
If your riding includes the occasional off-road adventure, then I wouldn’t hesitate with the Terraforce. Just know the limits.
Wear
Mitas TerraForce Rear at about 5,000 miles. Notice the “cooling ribs” and zero chicken strips.
My first set of TerraForce tires had about 5,000 miles on them before I had a puncture in the rear tire. I could have plugged the hole, but decided instead to get a new set because I was heading on a long trip down the Blue Ridge Parkway and didn’t want any trouble. In my estimation, the tires had about 4,000 miles left in them. Do the math and I bet you can get a solid 10k out of the rear and perhaps 10k from the front. Your results may vary.
The front tire at about 5,000 miles. The tread blocks wear a bit unevenly.
However, the large blocks seem to wear unevenly in the front. Not bad, but still this could be the determining factor in replacing the tires and not tread depth. See photos.
Wide, Open Sipes
As I mentioned earlier, these grooves tend to cause vibration and some noise and that the big blocks tend to wear unevenly.
One unique feature of the TerraForce (and the Mitas SportForce) is the little cooling ribs at the base of the open grooves.
The plugged puncture in the thin part of the carcass. Wide grooves make the tire vulnerable.
The one thing to consider is having such open grooves makes the tire vulnerable to punctures. I had a rear flat while with street students, becasue a sharp stone penetrated the thinner part of the carcass inside the groove where the rubber is thinner. The rock was the size of a pea…small enough to get inside the groove, but big enough to puncture. Keep this in mind if you ride a lot on gravel roads with small stones.
If you plan to buy the TerraForce or any other product, check with Twisted Throttle. Please click the link or the image then type “mitas” in the search field. This will send you to the twisted Website and any purchases you make help support this blog. BIG Thanks. Twisted Throttle helps support this blog. They also have quality luggage & racks, riding gear, electronics, auxiliary lighting, bike protection, and much more. Happy shopping!
We talk about all manner of riding topics, including her love of riding, how she got into the sport, women and motorcycling, how she relates to motorcycling, and much more. Enjoy this thoughtful conversation.
Stay tuned for more episodes. Subscribe to learn when new episodes air.
In this episode of Riding In The Zone TV, moto-philosopher and iconoclast Adam Novitt challenges established Motorcycling norms and beliefs. Adam is a former MSF instructor, vintage motorcycle restorer and collector, Moto-Giro competitor and one of the most interesting people I know.
We talk about all manner of riding topics, including traditions, trends, perspectives that challenge the world of motorcycling, and much more. Sit back and mull over these musings.
Stay tuned for more episodes. Subscribe to learn when new episodes air.
Railing through turn 9 at New Hampshire Motor Speedway (Loudon) photo: owenstrackdayphotos.com
Most riders sit pretty much upright in the saddle. There’s nothing wrong with that, however they are not utilizing a simple tool that helps the motorcycle turn, engages the rider in the “dance” between human and machine and increases ground clearance when needed.
We Need More Clearance, Captain!
Positioning your body to the inside of your motorcycle when cornering means that the motorcycle does not have to lean as far for a given speed and turn radius.
Hanging off makes this so by shifting the combined weight of body and machine to move the center of gravity lower and to the inside.
Easier Turning
Hanging off not only increases ground clearance, it also keeps the contact patch closer to the center of the tire and adds a degree of “power steering” to help initiate lean. By pre-positioning your body just before turn-in preloads the bike so it falls swiftly from upright to leaned. It can be unsettling the first time you do it as the bike turns so much easier, so experiment gradually.
Let’s Dance
Body position has an additional benefit of encouraging interaction between you, the bike, and the road. Move your body through a series of curves like you would a dance partner across a dance floor and you’ll be flirting with the Zone in no time. Lead with your eyes and shoulders and your motorcycle will willingly follow your lead.
Active body positioning isn’t just for sport bike riders. Try it on whatever motorcycle you ride.
Body Position “Levels”
You don’t have to hang off like Marc Marquez to benefit from body positioning.
When speeds and lean angles increase, it’s beneficial to use a more “active” body position that provides a greater amount of turning ease and ground clearance. There are three levels of body positioning for cornering: The “basic”, “intermediate”, and “full” hang off techniques.
The “basic” position
Use the basic body position for typical street speeds. This position involves simply leaning your upper body off-center, towards the inside of the turn. Position yourself as if you are kissing your mirror. Keep your inside shoulder low and forward while your eyes look through the curve. Your butt stays more-or-less centered on the seat.
The basic position is easy to do and is not intimidating, making it good for people just learning to hang off.
The “Intermediate” position
The intermediate stage is the body positioning technique I use when riding on street twisties. It is appropriate when riding more aggressively, but is no where near the level of extreme positioning typical of racers.
Learning this is quite simple. All you have to do is lean your upper body into the turn while rocking your hips so your inside sit-bone supports most of your weight. Rocking onto your inside butt cheek just before the corner positions your arms perfectly to countersteer with your inside arm and shoulder pressuring on the inside handlebar and your outside arm slightly extended and relaxed.
Rock onto the inside butt cheek just before the corner so that your body is in position as you countersteer. This is a very simple and effective technique.
The “full” hang off position
The full hang off position allows the most aggressive riders to achieve faster corner speed without dragging hard parts. Hanging off has a lot of benefits, but can cause problems if not done correctly. Here is a basic tutorial:
Get your weight on the balls of your feet.
Use your legs (a little of your arms) to lift your body into position with your butt on the inside edge of the seat.
Position your shoulders and head inside and low (kiss the mirror).
Keep your hips perpendicular to the motorcycle.
Keep about 2-4 inches between your crotch and the fuel tank.
Rest the inner thigh of your outside leg against the tank.
Support a little more than half of your weight with the inside foot.
Hold the grip like a screwdriver with the forearm more or less in line with the handlebar.
Relax your arms by supporting your weight with your legs and torso.
Rest your outside arm on the top of the tank.
Avoid rotating your hips around the tank, which can result in a “crossed” body position where the upper body is positioned over the center of the bike. Instead, keep space between your crotch and the tank so you can move laterally across the bike.
Jack Your leg Into the Tank
For extra support, you can press your outer thigh into the gas tank. With the ball of your foot on the outside footpeg, straighten your ankle to make firm contact between the peg and the tank. Extending your leg in this way helps support your body with your legs, not your arms. The cutouts in sport bike gas tanks are ideal for positioning your inner knee. Adding Stomp Grip® or TecSpec® can help make the contact even more secure.
Side-to-Side Transitions
Try not to use your handlebars when moving from side to side. Doing so can upset the chassis and traction. Instead, use your legs and torso. Get your upper body over the tank, keeping your arms bent. I find that more rearward footrests help with this.
Also, be sure to get your body in position before you initiate lean (often while braking for the turn). Waiting too long can make the corner entry rather stressful and chaotic. Pre-positioning your body results in a quicker turn in (the benefits of quick turning is a topic for another day). It takes some practice to brake while in the hang off position, but it is a technique that must be learned (another future blog topic, I think).
Hang at Your Own Risk
You should be discrete when hanging off on the street. Not only is a full hang-off posture not often necessary, it also draws a lot of unwanted attention. Even when hanging off on the racetrack, it’s not always necessary to hang off like Marquez. Hang off just enough to match your corner speed. Hanging off more may make for better photos, but it’ll wear you out sooner and could actually decrease control.
Slow Speed Maneuvers
One exception to the “inside” body position is when making slow speed maneuvers. In this case, you want to keep your body upright, on top of the bike. This is because stability is almost non-existent and adding body weight to the inside of the bike will lever the bike to the ground. Read about slow speed maneuvers here.
Body Positioning is discussed in the RITZ book. Parking lot drills are also provided so you can learn to make proper, “active” body positioning an integral part of your riding.
The ability to keep your motorcycle upright at parking lot speeds won’t necessarily save your life, it may save you from a broken foot (happened to me) and expensive damage. Sure, you can try to balance your bike using your legs, but it’s way better for your confidence and street cred if you rely more on proficient slow-speed maneuvering skill.
How Not to Suck at Slow Speed Riding
As speeds decrease, we lose the benefit of inertia and gyroscopic forces. The slower you go, the greater role you play in keeping gravity from pulling your motorcycle onto its side. This means keeping the Center of Gravity located directly above the tire contact patches (or keep the contact patches directly beneath the Center of Gravity).
To do this, you must constantly adjust the Center of Gravity / contact patch relationship. It’s like trying to balance a broomstick on your palm. It takes continual adjustment to keep the broom’s contact point vertically below the Center of Gravity so the broomstick remains upright— react too slowly and the broomstick falls to the floor.
You must do the same thing when trying to stay upright on a slow moving motorcycle. The difference is that the motorcycle is the “broomstick” and you must move the tire’s contact patch to keep in balance. This can be done by turning the handlebars left and right, causing the steering head– and the motorcycle’s Center of Gravity – to shift from side-to-side.
By shifting your bodyweight, you move the combined Center of Gravity of bike and rider over the contact patches. A limber torso and a loose grip on the handlebars helps maintain balance in this way.
When making tight turns, position your weight on the outside footpeg (the right peg for left turns) while keeping your body upright as the bike leans. This is called counterweighting.
Keep weight on your footpegs so you can lean the bike more-or-less independently of your body (and vice versa). This allows you to quickly shift body weight, turn the handlebars, or lean the bike to regain balance.
Look Like You Mean It
We tend to go where we look and where you want to go. When performing a tight U-turn that is 180 degrees behind you. Turn your head over your shoulder to look at the turn “exit”.
Brake Control
One other reason for keeping your feet on the footpegs is so your right foot can apply rear brake pressure if you need to slow.
The rear brake is also useful for increasing stability. Maintain steady drive while you drag the rear brake to control speed and also give the drivetrain a force to “pull against”. This “tension” steadies drive force and helps pivot the bike around when making tight U-turns.
Drive Control
One of the most critical controls to master when performing U-turns is throttle control. Forward drive must be delivered smoothly, otherwise you risk dropping your motorcycle. It’s really difficult to make a tight U-turn with the motorcycle lurching abruptly from ham-fisted on-and-off application of the throttle.
All Together Now
Let’s put all the parts together to perform a tight, slow speed turn:
Slow to a suitable speed
Once the motorcycle is slowed, release the brakes
Position your butt on the outside edge of your seat and keep your body upright (counterweight).
Lean the bike and turn the handlebars
Turn your head like a barn owl
Roll on the throttle enough to not stall and keep the throttle steady.
Ease out the clutch about halfway, using the “friction zone” for speed control.
Drag the rear brake lightly to refine speed control.
Turn your head, turn the handlebars, lean the bike, slip the clutch, drag the rear brake, and control the throttle. That’s not too much to do, right?
You may have to lean quite a bit, but that’s okay as long as you maintain steady drive. Minimize throttle movement by keeping your wrist down and anchoring your thumb or index finger to your handlebar control pod.
Rolling U-Turns
When you can, try to do your tight U-Turns from a rolling start. That way you have stability already under control. You can also utilize the “keyhole” technique of rolling forward and then swerving slightly away from the direction you want to go before making the turn. this gets the bike leaned earlier.
U-Turns from a Stop
This is a bit tougher. To make a tight turn from a stop, you will want to pre-position yourself and your bike before moving forward. This is done by turning the handlebars to almost full-lock while leaning the bike as far as you feel comfortable into the turn. Your right foot should be on the rear brake with your left leg supporting the bike. Turn your head over your shoulder to look at the turn “exit”.
Now, give it a bit of gas while easing out the clutch quickly enough to go from zero stability (standstill) to stable (about 3-5 mph) in as short a time and distance as possible. But, don’t rush. While doing this, maintain the laen angle and handlebar turn. Get it right and the bike hioooks around gracefully.
Speed Equals Stability
Remember, if you start to fall over, just ease off the rear brake or ease out the clutch a bit to get your speed up a little. But, not too much or you’ll run wide.
Slow speed handling doesn’t have to cause anxiety. A bit of knowledge and practice can increase confidence and decrease the likelihood of a slow speed tip-over and possible injury.
Tell me your experiences with slow speed successes and snafus.
To execute smooth downshifts, it is important to match the engine speed with the road speed. You can do this by slowly easing out the clutch (after you slow).
But sometimes a rapid downshift is necessary. The problem is that releasing the clutch at the wrong time and too abruptly can lead to lurching re-engagement and a rear tire skid or “chirp”. This is where throttle blipping comes in.
Explore an extensive selection of items and fantastic deals on Shoppok, your one-stop online destination for all your shopping needs. Don’t miss out on the amazing offers and seamless shopping experience that Shoppok provides for shoppers around the globe.
Throttle Blipping is the term used to describe the rev-matching technique where the rider momentarily “blips” the throttle to increase engine rpm to better match the revs to the road speed when downshifting.
You’ve probably heard riders blip their throttle as they downshift while rolling to a stoplight. But, throttle blipping is best heard when a sport bike is decelerating and downshifting (and usually braking) from high RPM and high speed.
Listen to my friend Aaron as he demonstrates some of the quickest and smoothest throttle blipping I’ve heard (or is it the magic of modern sport bike electronics?). Listen at the end of the straight starting at 0:15:
Here’s another video showing my throttle hand as I blip the throttle. See 2:20. For comparison, I enter the same corner, but without blipping at 4:08.
Here’s another video showing me smoothly execute three non-blipping downshifts at around 4:15:
The throttle blipping technique is done by quickly cracking the throttle open then closed (blip) while you simultaneously squeeze the clutch and click the gearshift lever. The point is to get engine RPM matched to the lower gear ratio before you release the clutch. The rapid blipping technique occurs within the span of about one-half second. The clutch is quickly squeezed and released as the transmission is shifted down and the right hand blips the throttle. This is repeated with every downshift, one gear at a time.
You can blip the throttle rapidly to reduce the time between gears, or you can be leisurely. High-performance riders blip the throttle very quickly when downshifting between gears as they set up for a corner. Street riders may choose to blip the throttle when downshifting. This is done more slowly when coming to a stop.
Blipping and braking smoothly takes practice.
Brake and Blip
Oftentimes, you need to brake while downshifting, but trying to simultaneously brake while blipping is a difficult skill to master. The problem is that moving the right hand to blip also causes the braking fingers to move, which invariably changes brake pressure. Combining braking and throttle blipping can be done with less difficulty if you apply the front brake with your index and middle fingers while you close and open the throttle with your thumb and two outside fingers. Arching your brake fingers is also helpful in isolating throttle movements.
The point is to blip the throttle while keeping consistent brake lever pressure. This is most easily done when using very firm braking pressure , like when braking hard from high speeds where brake lever movements translate into relatively minor brake force changes.
Technology
Nowadays, you can get a motorcycle that will allow you to shift up and down without using the clutch. When downshifting, the bike’s electronics automatically blips the throttle perfectly as you downshift. Pretty slick.
Is Blipping Necessary?
Some motorcycles benefit from throttle blipping more than others. A big V-twin or single cylinder engine with a lot of engine braking can more easily lock the rear tire if the clutch isn’t released carefully, so blipping makes sense. But, for many bikes, especially ones with in-line 4 cylinder engines, it’s easy enough to quickly but gradually release the clutch between downshifts. It’s what I do when I ride my Triumph Street Triple on the street or track (see video below). With the introduction of slipper clutches on many sportbikes these days, it’s even less necessary to blip the throttle.
Still, a lot of riders swear by throttle blipping. That’s fine, if you do it skillfully. I find that it just adds another thing to do while I’m screaming into turn 1 at over 100mph. Listen to my downshifts at the end of the long straightaway in this video from a recent track day, starting at 2:06 and then throughout the video. You can hear how I simply downshift and then ease out the clutch. It’s done quickly, but smoothly:
Engine Braking
One problem with throttle blipping is that it minimizes the stabilizing effect that comes from engine braking. Let me explain.
Engine braking (or rear brake force) causes the rear tire contact patch to drag behind the front tire’s contact patch. Think bungie cord. This pulls the rear of the bike in line with the front.
Blipping the throttle during downshifts minimizes engine braking compared to simply easing out the clutch. A little bit of engine braking still happens, it’s just not as much.
Practice
Throttle blipping can be a challenge to learn. But, here’s how.
Sit on your stationary bike with the engine idling and in neutral. Blip the throttle quickly (like a spasm) so the engine revs 600 to 1,000 RPM.
Next, simultaneously squeeze the clutch just as quickly as the throttle. Only squeeze the clutch in about half way. That’s enough to get the transmission smoothly into the next lowest gear.
The next part can’t be done while the bike is running, so shut it off and repeat what you just practiced, but this time press the shift lever down simultaneously with the throttle and clutch. All three controls are engaged at the same time, within the span of less than a half second.
Now go try it in a parking lot. I won’t be pretty at first, but stick with it. Good luck.
Do you blip your throttle? If so, or if not, tell us why?
North American sport and sport touring riders have a relative newcomer joining the sport tire fray with the Mitas Sport Force+. It turns out that Mitas (pronounced me-tass) has been around for a while as a maker of agricultural tires, but also manufactures vintage, moped, scooter, flat track, speedway, street and off-road motorcycle tires. The Sport Force+ expands the Czech company’s presence into the modern sport tire category that includes the Michelin Pilot Power and Pirelli Rosso Corsa, among others.
Riding Impressions: Track My first introduction to the Sport Force+ was on a damp, but drying racetrack at Palmer Motorsports Park in Central Massachusetts. The Mitas tires warmed up quickly and then stuck like glue. The tires helped the Z750S test mule carve the technical track with good precision and composure. The front tire profile provides predictable
Photo- OTMPix.com
response that allowed confident and precise corner entry. Turn-in was not terribly quick compared to a race tire, but just right for a street tire. The bike held its line while trailbraking into corners and stood up as expected when exiting hard on the gas. The moderately stiff carcass provides good feedback and great stability under hard braking.
The only negative I found was that feedback from the front tire became vague as I picked up the pace. Reaching knee dragging lean angles was not a problem, but it takes trust to get there. Once off the racetrack, these sticky the tires easily passed the universal “thumbnail test” for perceived grip potential. Curiously, the front tread area wraps far enough around the tire to leave a rather large chicken strip even after reaching knee-dragging lean angles.
Riding Impressions: Street Maximum grip and stability are important features when riding hard on the racetrack, but a sport street tire must also provide predictable manners and a reasonably comfortable ride. In this area, Mitas manages to find a good balance. Grip is more than adequate for street riding and the tire rolls into corners consistently and predictably. The somewhat stiff carcass transfers a bit more harshness to the chassis than similar sport tires, but that rigidness also contributes to feel and stability when cornering and braking more aggressively.
Cornering characteristics are very good with moderate countersteering effort needed to initiate lean. A slight amount of oversteer happens at about 30 degrees of lean angle with the bike falling into the turn a tiny bit more than expected, but nothing of concern.
Cornering characteristics are very good with moderate countersteering effort needed to initiate lean. A slight amount of oversteer happens at about 30 degrees of lean angle with the bike falling into the turn a tiny bit more than expected, but nothing of concern.
Pricing is competitive, but not exceptionally cheap, so the reason to consider the Sport Force+ is for its ability to perform at a very high level in all conditions while also providing decent longevity. Our test set spent a half-day on the racetrack at a fast intermediate pace along with 1,200 street miles that included Deal’s Gap and the Blue Ridge Parkway. Considering the grip these tires provide, the lifespan is appearing to be surprisingly good. Of course, time will tell just how long they last.
Overall, the Mitas Sport Force + is a really good tire that compares well with the more recognizable sport tire brands. Sizing is strictly for 17 inch wheels and ranges from 110-120 fronts and 150-190 rears (You can find a 190 rear for sale HERE). Retail pricing is around $100.00 for fronts and $140.00 for a 180-size rear.
Please Donate to Keep the Articles Coming
If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!
Click the PayPal “Pay Now” button.
Then indicate quantity in $2.00 increments. – Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.
Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.
In this first episode of Riding In The Zone, I talk to Stephanie Funk, a professional race driver whose love of motor sports has begun to bleed over into the world of motorcycling. Stephanie talks about her love of riding, how she got into the sport, women and motorcycling, how to get a closer look at the world of motorcycling through track days, and much more.
Stay tuned for more episodes. Subscribe to learn when new episodes air.
This episode is an interview with Paul Duval, championship LRRS racer and track day instructor shares his thoughts on getting up to speed for a new racing and track day season.
Today’s episode is on countersteering. What is it and how do you do it?
A motorcycle turns by leaning. Once the bike is banked over, the geometry of the chassis, as well as the rounded profile of the tires and hard-to-describe forces cause the machine to arc around the curve. So, to turn a bike you must get the motorcycle to go from upright to leaned…precisely and efficiently.
This episode is on trailbraking. What is it, what are the benefits and how do you do it?
Sometimes delaying your braking can be a useful tool. Trail braking is a technique that is done by continuing to brake beyond the turn-in point. You then gradually “trail” off the brakes as you lean until there is no brake pressure by the time you are at full lean.
Practicing emergency braking is critical. But, is it enough?
Getting your motorcycle stopped in time to avoid a collision is one of the most important skills you can have. But, simply being able to apply maximum brake force isn’t enough (even if you have modern ABS). Here is an article I wrote for Motorcyclist Magazine a while back about braking and reaction time that I think deserves some more airtime. Enjoy!
You’re riding along minding your own business when suddenly you are facing the bumper of a left turning sedan. Every cell commands you to get the motorcycle stopped ASAP to prevent your early demise. But, will your response be quick enough?
It’s a good thing that we are hardwired to respond immediately to threats, but too often our synapses do not fire fast enough for a quick and effective respond. Thankfully, there are ways to help make sure you aren’t a victim of too little, too late.
Perception Time
There are actually two components of reaction time: “perception time” and “activation time”. Perception time is the time it takes to figure out what’s going on and decide what action to take. Response time is the time it takes to reach for the brakes. You also have to account for the amount of time it takes to actually get the bike stopped.
Let’s say you’re traveling at 40 mph, which is about 59 feet per second. Recent research indicates the average rider will use about 1.5 seconds to recognize the situation and reach max braking rate, also known as perception-response time. That number can increase to over 2 seconds if you’re daydreaming. That equates to between 88 and 117+ feet before any physical action is taken.
illustration: Ken Lee
Stopping Distance
The actual time it takes to get the motorcycle stopped once the brakes are applied depends on speed, machine geometry/weight, available traction, and your ability to use your brakes fully without skidding (ABS helps in this regard). Recent research also shows that an average rider can only achieve a braking rate of 0.6 g’s. That means from 40 mph you’ll need 89 feet to complete the stop. The 1.5 seconds of perception-response time mentioned earlier adds another 88 feet for a total stopping distance of 177 feet.
With perception-response time adding nearly 50% to the total stopping distance, you can see why it’s so important to remain alert. You also want to develop your ability to predict when bad things are about to happen before they unfold. Get ahead of potentially hazardous situations by aggressively scanning for clues that indicate trouble. Be especially vigilant when approaching intersections where most collisions occur.
Stopping in a Corner
Hard braking when the bike is upright is tricky enough when facing an emergency. But, things get even more challenging when you have to stop quickly while leaned because of a hazard around a corner. Perception, response and braking times still apply, but now you also need more time to free up traction by reducing lean angle so you can brake hard with less chance of traction loss. This necessary action adds to total stopping distance. Machines with Cornering ABS offer a distinct advantage here where you can brake hard while maintaining lean angle.
Be Ready
You can reduce activation time by covering the front brake lever and rear brake pedal when approaching potential hot spots. Not only will this simple action reduce activation time, it also puts your whole system on alert.
Of course, the best way to reduce braking distances is to slow down. Trimming just 5 mph off your 40 mph travel speed requires about 32 less feet to stop. Add 5 mph and you’ll need about 35 more feet to stop. Speed up to 60 mph and you’re going to need an extra 155 feet to stop, for a total of 332 feet. Yikes.
Whether or not you avoid a crash is dependent on your ability to react quickly when an otherwise sublime day suddenly turns into a DEFCON 1 war zone. The best riders remain alert and ready for battle, wasting very little processing time before executing evasive action. They also cover the brakes to reduce activation time when approaching intersections. The final step is to regularly practice emergency braking techniques. Can you stop your motorcycle in the shortest possible distance while maintaining in control? Too many riders cannot.
Riding with a group of friends can be a blast. But, it can go all pear-shaped if certain precautions aren’t taken upfront. Some problems are merely inconvenient, like when the group has to wait around because someone didn’t arrive with a full tank of fuel or when someone goes AWOL during the ride.
Other problems are more serious, like when a guy runs into the back of another rider because he was riding too damn close, or when a knucklehead lowsides into a guardrail trying to keep up with the fast guys.
Group rides can be a great way to meet like-minded riders.
As a group leader, it is your responsibility to take some basic precautions. Let’s take a look at a few.
Before we start: These tips do not take the unique issues of very large groups into account. However, these tips can be used for groups of 2 to perhaps 30 riders. Trying to manage more riders than that and your into a whole other ball of wax. Breaking into smaller subgroups is a better solution.
We Gotta Talk
The root of most group riding mishaps can be traced to a few key factors. The first one is a failure to voice basic ground rules so that members know what to expect and what is expected of them.
Start by evaluating the group; are they aggressive and reckless, or law-abiding and considerate? Is there talk of drinking alcohol or stunting? If so, then nip it in the bud, or pay later.
Speed & Passing
The group is better off if all participants agree on general speed limits and passing. Some group rides I’ve attended come right out and say that I should expect illegal passing and speeds that exceed the legal limit. Knowing this ahead of time let’s me decide whether or not to participate.
One option is to break into sub groups with one sticking to more conservative speeds while following the rules of the road.
Another rule I want to know is whether there is passing within the group. I’m not a fan of inter-group overtaking because it encourages bravado and risky dicing. If passing within the group isn’t allowed, then faster riders should ride up front and everyone must maintain a safe following distance from each other. If a rider wants be in a different part of the group, he or she can wave someone past or change positions at the next stop.
When the leader decides to overtake slower traffic, he or she must be smart about whether it’s worth the risk. If you have a turn or stop coming fairly soon, just hang tight. But, if the opportunity presents itself to make a pass that is safe for all, do it. Your fellow riders then decide to pass or not and hopefully have the self-discipline to patiently wait if it’s unsafe to overtake.
Passing as a group is dangerous if riders blindly follow the person in front. It’s better to tell your group to wait until the rider ahead has almost completed the pass before committing. And when making the pass, maintain passing speed well beyond the slow vehicle so that the next person has room to return to the lane and file in behind you.
Formation
A staggered formation is often the norm when on long straight sections of road with at least a 2 second following distance from the bike directly ahead. This means that you will be only about one second behind the rider offset to your immediate left or right. Even though the staggered formation gives riders access to the width of the lane, this formation is pretty tight and can lead to collisions when attempting evasive maneuvers. By riding two abreast, you are limited to either the left or right portion of your lane. And that’s just not good enough for maximum safety.
That’s why the leader needs to abandon the staggered formation when the road is narrow or riddled with surface hazards and when the road turns twisty! When following single file, each rider has the full width of the lane to use cornering lines or avoid mid-corner hazards. .
There is a recent discussion about something called the “reverse formation”. It basically has the front rider in the right wheel track rather than the left. The idea is that it affords the second rider to see and be seen better. But, I have my reservations, because this puts the first rider in a spot that is hidden from view and prevents him or her from seeing ahead as well. See the video and add your thoughts in the comments below.
Staying Together
One time when riders should be side-by-side is when coming to a stop or entering traffic. When stopping, the leader should gradually slow and come to a complete stop. The rest of the riders should “box in” so the group is compact.
To keep the group together, the leader should stop and wait when possible, like at intersections and then wait for the last rider to arrive. Look for a thumbs-up before continuing. This is used in combination with each rider taking responsibility for the rider behind by waiting until the straggler is in sight before turning onto a new road.
One thing I see from time to time is a group leader who is too concerned with keeping the group together when it isn’t necessary (or safe). For example, if there are no turns or stops for people to get lost, then keep moving, make safe passes and let people have fun. And know when it is important to keep the group together, like in areas with many chances for wrong turns.
When it’s time to go, the leader should leave slowly. This helps prevent the bungie effect where riders in the back must go much faster to catch up with the leaders. Remember, the group is relying on the leader to lead the way.
Some groups use communicators between the group leader and a “sweep” rider to monitor things. This can really help manage group rides and is a way the leader can know if the pace is okay or if there is any potential trouble. An experienced volunteer should be put in charge of this sweep role.
The Pace
Group riding often places safety in the back seat. It’s not unusual for safety-focused individuals to become reckless when exposed to pack mentality. One thing to emphasize that each person rides within their limits and to resist the temptation to keep up with the group. Far too many group rides end in tragedy because one or more participants exceed their riding ability.
Managing the group’s pace is the job of the leader. Many times the leader sets a moderate pace, only to increase the speed as the ride progresses. It’s okay to wick up the speed through a nice set of twisties, but you must then slow the pace to allow stragglers to catch up without much effort. This pattern balance fun with predictability that encourages slower riders from feeling a need to stay in touch.
Yamaha Champions School guru, Nick Ienatsch penned The Pace article that has been referenced by many riders over the years. Check it out.
Poo, Meet Fan
When things do go wrong, you will want to be able to manage the situation. Ask if anyone is CPR or First Aid certified if you’re not. However, getting certified in first aid training cambridge is the safest as you may not always find help. Know if you’ll be riding in areas with no cell service and have an idea of the nearest population if you need to send someone to make a call.
It’s smart to attend a class or seminar that discusses how to manage an accident scene and a motorcycle scene in particular. Or, you can also check out lawyers for slip and fall injuries in order to understand accident incidents.
Before this happens, you also need to consider if you could be held liable. Some groups require waivers, but most don’t. It’s implied that each participant is responsible for his or her actions, but that doesn’t stop family from coming after you anyway. Sucks, I know. But it’s the society we live in. It’s another reason to follow these tips to avoid problems. Also, encourage full protective gear so relatively minor mishaps remain minor. And don’t forget, having an AED on hand is a smart move – it could make a vital difference when needed. Safety matters to my company, and it should to you too.
Set the Tone
Yes, being a true group leader (as opposed to a reluctant leader) means you are willing to take on the responsibility. Not everyone is cut out to be a leader. It can be stressful, but is also rewarding to show others a good time. Group leading isn’t too hard with just a bit of preparation.
This leadership begins before the ride by posting rules and expected behavior, encouraging full protective gear and explaining logistics. A bit of foresight reduces risk and increases enjoyment. And if things go well, you’ll look like a hero. If things go wrong…well, just follow these tips and you will hopefully be okay.
Sweep Riders
Well organized groups select a strong rider to take up the back to keep an eye on things. This person can identify any particularly weak or aggressive riders and can help keep the group together. Communication to the group leader is a huge plus.
More on Group Riding
Marc R. one of our guest instructors penned a piece on riding in groups that dovetails nicely with this article. Check it out.
At the request of the district manager for the Northeast Region, I booked several dates during mid-to-late winter of 2018. One event was held at Wilkins Harley-Davidson, located in South Barre, Vermont. As with each of the talk, around 100 people attended to learn about cornering…or learn more about cornering. Wilkins recorded the seminar in its entirety.
My aim with these talks is to spread the good word about the benefits of life-long learning…safety and MORE FUN and satisfaction. A secondary goal is to encourage participants to join me for one or more of the training opportunities I offer or am involved with.
This is a clear demonstration of the consequences of not having proper braking skills. Take a look and then I’ll give you my opinion. I’ll wait.
A shocking number of riders in this video’s original version blamed everything but the rider. Sad.
Well, this is the most classic example of a failure to apply the brakes properly under pressure.
The rider demonstrates an inability to “predict the future” through situational awareness leading to the sudden need for evasive action. And while you can argue that the rider was positioned too close to deal with the stopping vehicles and that the tar snakes reduced traction, the primary reason the crash occurred was lousy skills.
The rider skids the rear tire. Untrained riders react to panic braking situations the only way they know how… which is to stomp on the big brake pedal with their strong leg, like when driving in a car.
He then throws out his “outriggers” (legs) so that his feet are now off the pegs…and off the rear brake.
Our rider fails to use the most powerful tool at his disposal—the front brake.
All the time, the rider fixates his eyes on the back of the truck. Target fixation is the final straw.
This is 100% avoidable with proper braking practice. This article covers the basics.DO NOT neglect to develop this critical skill.
Please Donate to Keep the Articles Coming
If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!
Click the PayPal “Pay Now” button.
Then indicate quantity in $2.00 increments. – Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.
Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.
I always thought pledges were a crock until I learned the potential benefit in encouraging behavior change, risk awareness and a quest for greater proficiency.
The point of signing this pledge is four-fold. First, it is a way to help you reflect on yourself as a rider. Second, it is a commitment that you can share with your family saying you are doing all you can to make it home at the end of a ride. Third, it holds you to following these behaviors. Fourth, it encourages you to continually improve areas where you may be weak.
This pledge is not only for yourself to make riding more fun and safe, but also for the ones who love you. A commitment to safe riding is an expression of respect and love toward your loved ones.
Imagine the emotional and financial pain they would suffer if you die or become injured. Imagine them being forced to care for you by cleaning your wounds, or worse. Sorry to be a bummer, but…
So, here we go.
Proficiency Pledge
I will expand my knowledge of motorcycling safety and control through continual reading, and by taking a formal safety/skills course.
I will continue to practice my physical skills to keep them sharp.
I will learn about and develop mental strategies for managing traffic and other hazardous situations.
I will never ride while intoxicated or impaired in any way.
I will choose not to ride if my ability to manage hazards is compromised.
I will choose not to ride with others who do not share my commitment to safety.
I will wear protective gear on every ride.
Signed:___________________________
Feel free to add your own points. Also, feel free to copy this pledge and print it out.* Then sign it, hang it on your garage wall, and give a copy to each of the people who care about you.
*Please distribute this pledge to your riding friends and family. I’d really appreciate it if you include credit and a link to this article. Thanks.
This 400 pound 2000 MZ Scorpion 660 single makes 48hp and served as my daughter’s first street bike…and my road race bike. It cost $2,200
Surf any motorcycle forum or Facebook group and you’ll invariably find a thread asking for advice about the best motorcycles for new riders. Read the comments and you’ll see a very wide range of arguments for and against certain sizes, styles and models. You will also read discussions about whether the newbie will outgrow a 250cc “starter” bike too soon, followed by well-meaning people reassuring the new rider that they will be fine buying a 600cc super-sport machine or 1200cc cruiser.
You’ll even come across suggestions that a 1000+cc superbike or 1800+cc cruiser is just the ticket. These dodo birds can be identified by their native call: “I learned on a 195hp Hayabusa and did just fine, so don’t be a wussy.” Ummmm. okay.
One thing to consider when filtering advice is that people who have been riding a while seem to forget what it is like to be a newbie and view this issue through their own experience. And their advice is further skewed if learning to ride came to them easier than the average person. This leads to inappropriate advice that does not apply to most average beginners.
Here are my thoughts on the topic:
Size and Power Matters
I don’t care what the internet “experts” say, with few exceptions a new rider is better off starting on a physically smaller bike with modest power.
Newer riders use most of their bandwidth just staying upright without whiskey-throttling themselves into a fence. Toss them into the real world and their heads explode trying to juggle the controls while negotiating blind curves, distracted drivers and surface hazards they never had to worry about as car drivers.
You could argue that these challenges are present no matter what bike the beginner is riding. This is true, but a smaller, less powerful bike is easier to control and is much less likely to intimidate. The odds of a newer rider sticking with riding are greater if the bike they ride is fun…and fun to a newbie means easy to ride…and that means less weight and power.
Fit Matters
This older Honda Rebel is a popular bike for new riders with short inseams.
Alright, there are times when a larger , more powerful bike makes sense like when it has to haul around a large human. In this case, I suggest a mid-sized bike with just enough power to comfortably maintain 70mph with adequate legroom and reach the handlebars.
The type of bike chosen needs to match physical limits. A person with a bad back should choose a bike with more upright ergonomics. Despite common belief, cruisers aren’t good for most people who have back issues, as the riding position rounds the spine, causing discs to bulge. People with neck or shoulder problems may need to stay away from race-replica sport bikes. I choose to ride a Triumph Street Triple as my track day bike, because it has most of the capability of a pure super sport bike, but with higher handlebars.
Reader Bruce A.pointed me to this cool site that can help you visualize how a person your size might fit on certain bikes. Click on the Options tab to see if your inseam will allow you to stand flat footed.
Seat Height
Suzuki 650 Gladius (a version of the SV650)
A big concern of most new riders (and a lot of experience riders, as well) is seat height, or more precisely, “can I touch flat-footed?”. This is understandable if the person is anxious about balancing a heavy motorcycle. The lighter the bike, the less concerning it is to have only the balls of your feet on the ground.
Most smaller riders choose cruisers because they typically have low seat heights. If you’re “inseam challenged” but want a bike that is more versatile than a cruiser, like a sporty standard or perhaps a small sportbike to carve curves to do track days you’ll have a few good options. Harley, Triumph and BMW offer low versions of certain models and many manufacturers have low seats and other components to help smaller riders feel more secure.
It may be possible to lower the chassis of some bikes using aftermarket suspension links and by slipping the forks higher in the triple clamps. You can also have seats cut down or find a lower aftermarket seat.
Learning Balance
Here’s one thing to consider…after some time learning how to balance the bike while stopping and starting, then not being able to touch flat-footed becomes much less of an issue. Once you become familiar with the balance of your bike and learn the slow speed techniques, you will be surprised how easy it is to keep a bike upright.
This means that eventually, you will be able to consider almost any bike on the market. Just don’t go crazy…you may drool over a big cruiser, tourer or adventure bike, but be realistic that the bike is a good fit.
Case in point, any capable dirtbike has around a 34-inch seat height. Few people I know have an inseam that long, meaning that all dirt riders must manage while only touching tippy-toe. Dirt riders quickly learn how to balance, and their dirtbikes are very light. Sure, a dirtbike can still weight over 300 pounds, but that is manageable by most reasonably fit individuals. Another example of light makes right!
New?
Ninja 250- sporty, comfortable and capable. This generation bike can be found cheap.
It’s tempting to throw down your money on a shiny new motorcycle. This option eliminates the stress of buying a used machine from some potential Craigslist scammer and you get the benefit of modern amenities and safety features, like ABS and traction control. Not to mention the pride of owning the newest model on the road. If you decide to buy a new motorcycle, you should immediately secure all the necessary title registration documents.
However, dropping $5,000, $10,000 or $15,000 on a bike that will likely get dropped puts a lot more stress on the new rider. Too much attention will be put on avoiding that first scratch on those shiny chrome or plastic parts. And stress does not create the best condition for fun or open learning. That’s why it’s almost always better to buy a cared-for used motorcycle that isn’t as precious.
Used!
Buying used means you need to do your research about whether an older model bike is appropriate, which includes being patient in your search for the right motorcycle. Unlike cars and trucks, most motorcycles do not rack up very high miles.
You will also likely need to do some maintenance tasks before the bike is fully up to snuff. Depending on whether or not you live in an area with long riding season, it’s not unusual to find a five year old bike with only 5,000 miles. That means that not too much will need to be done to make it roadworthy. However, a frequently ridden motorcycle five or more years old will have more 10,000 or more miles. Here are a list of components that often need replacement:
Keep in mind that whatever bike you buy (new or used), you want easy access to service and parts. Exotic bikes are cool, but it sucks if you have to drive hours to get it serviced and even worse if you have to wait too long for parts.
Mo Money
Another reason to buy used is so you have enough money left over in your budget to buy good protective gear. It is said that if you can’t afford a good helmet, jacket, pants, gloves and boots, then you can’t afford to be a motorcyclist. While that may sound draconian, it is a smart rule to follow.
You will also have money left to pay for advanced rider training. Don’t fall into the trap of thinking that once you know how to operate the bike that you know how to “ride”, which involves much more than simply being able to control the machine.
Ken racing an old 50hp Kawasaki EX500 Ninja worth less than $2,000. Photo: Jonas Powell Photography
Ride a Slow Bike Fast (safely)
I want to emphasize that the bikes I am listing below are not only “beginner bikes”! These bikes are appropriate for new riders, but are also entertaining enough to captivate experienced riders who know how much fun it is to ride lightweight machines. Unfortunately, most people think that moving up to the large displacement as soon as possible is the way to go. It’s not.
Take me for example. I have ridden almost every large and small motorcycle on the market and still choose to stick with my middleweight Triumph Tiger 800 (streetbike) and Street Triple (track bike).
Speaking of track day bikes, I constantly caution track day riders from buying larger and more powerful bikes, and instead, stick with the smaller bike they started on and learn to ride it really well before considering a move.
Even riders at the top of their game don’t often find benefit in owning a bike with more power. Believe me, it is quite possible to ride faster on board a 600cc sportbike, or even a well-setup SV650 than someone struggling to manage the power of a liter-sized superbike. Lower-powered bikes push the rider to ride more efficiently and corner with greater precision. Big power tends to be a crutch that slows down skill development. As the saying goes, “it’s more fun to ride a slow bike fast, rather than ride a fast bike slow”.
The video shows the Intermediate (Yellow group) session with Tony’s Track Days. Before anyone asks; the suspension and every other component on the 250R is stock. Thanks Younia, for the ride!
One last thing to consider are the benefits to riding off-road for new and experienced riders to learn traction management, body positioning and throttle control where there are no texting teens to punt you off the road.
Best Bikes for Newer Riders and Open-Minded Veterans
So, here is my list of street bikes appropriate for new or newer riders, by size and category:
250-400cc
Kawasaki KLX250s
Dual-Sport
Dual-sports are used on pavement and dirt. They have tall seat heights, but are very light compared to other street-legal bikes.
Honda CRF250L– A great choice if you can manage the seat height. $$
Yamaha XT225/250- Very low seat height and great as a commuter or for off-road adventures. $$ – Older 225s are just as good and with more comfort. $
Yamaha WR250r – More hardcore than other choices in this category. $$$
Kawasaki 300 Versys – A more street-oriented “adventure” style bike. A great choice if you ride mostly pavement, but also want to ride easy dirt roads.
Suzuki DR200 – Old technology. Look for a decent used one. $
BMW F650GS/ G650GS– Made up until 2012. A more street oriented bike that is heavier than most dual sports. $$$
BMW G310GS- A brand new model that promises to be a real winner. $$$
CSC TT250/RXR/RX3 – A Chinese manufacturer offering very affordable motorcycles. $
Street/Sport
Nighthawk 250Street Sport/Standard
BMW G310R– The roadster version of the G310 GS $$$
This is a list I came up with, but I know I’m missing some options, like older bikes. Please include your thoughts in the comments below and I’ll consider adding it to the list.
What You Won’t See On My List
A lot of beginners eye bikes in the 600cc class of sport bikes, thinking the engine size makes it manageable for a newb. But, 600s are shar edged tools that can cut a rider whose skills aren’t developed enough. Yes, beginners survive starting on a 600, but why put the beginner through the stress of having to manage a machine designed for experienced riders?
You may wonder why there are several 650cc and 800cc bikes on my list. Well, those bikes are designed to be easy to ride by average riders wanting a bike that is comfortable and practical for all types of riding. The engine displacement may be greater, but the power delivery is more mellow and user-friendly.
Cruisers are sized with big displacement engines, but they are tuned to lug around town and produce less power per cc than standard or sporty models. That’s why it’s not unheard of to find a newb riding a 1000 or 1200cc cruiser as their first bike. But, these bikes are still not great starter bikes becasue they are heavy with forward controls and a long wheelbase, making them unwieldy at slow speeds.
Suzuki SV650
Bottom Line
Get a used Ninja 250/300 if you’re small and like performance machines. Get a Honda Rebel 300 or 500 if you like cruisers and have a really short inseam. Score a Honda CRF250L or a Kawi KLX250s if you lean more toward off-roading and have long legs or get a XT225/250 if you have shorter legs. Get a Kawi 300 Versys if you like adventure-bike styling and capability. For a sportier bike, consider a Honda CBR250, Kawasaki 300 or 400 Ninja or a BMW 310R.
A step up in size may be just fine for a lot of beginners. In this case, the Honda CB500 series makes a lot of sense. I like the Vulcan S for a mid-sized cruiser and a cheap, used DRz400s for a bigger dual-sport. KLR650 is another (heavier) off road worthy option.
For someone who is pretty comfortable on two wheels, a Ninja 650 or SV650 are my most recommended bikes becasue they are capable of touring, commuting and doing track days. You can even ride dirt roads pretty well on these bikes. The Versys 650 is another great option, as is the Yamaha FZ-07.
For bigger dudes with the skill, a BMW 700/800GS or F800R may work (750/850 for 2019). For cruisers, you may get away with a Harley 883 or even a 1000 Sportster, but I’d seriously look at the Indian Scout. For sport bikes, consider a Honda CBR650 Ninja 650, or drum roll…a used SV650.
Be Bright. It’s smart to wear brightly colored riding gear that gets attention and separates you from the busy background. This includes wearing a light-colored helmet and jacket or vest, as well as putting reflective material on your bike and riding gear for being seen in low light situations.
